Aluminium Extrusion

Aluminium Extrusion

With high accuracy and sophisticated technology, our products meet the most stringent and specific requirements set by our customer across different industries. We offer extrusion for aluminium alloy 1070, 6005, 6061, 6063, 6082, as well as special alloys, with extrusion profiles measuring up to 300mm in CCD (Circumscribing Circle Diameter) and extrusion length up to 12 meters. Diversity, quality and consistency are hallmarks that we pride ourselves in. 

Architecture & Building Construction

ALBESASH, ALBEDOOR and ALBEXWALL are our high performance systems specially designed to meet stringent technical requirements while providing aesthetic finishes for architects. Our standard series includes windows and door frames, curtainwall, louvre, shopfront, grille, skylite, roller shutter, handrail and other architectural systems. 

Besides that, we are the main distributor of ALTAIR Louvre Window by Breezway, which made of high quality components and tested against wind pressure and water leakage.

Electronic & Electrical Components

Heat sink, heat exchanger, busbars, television aerial, telecommunication parts, lighting parts, electrical tubes & piping and others.

Furniture & Interior Decoration

Office partition, banquet chair, curtain track, kitchen cabinet, wardrobe profiles and others.

Formwork

Aluminum formwork components and relevant products.

Transportation & Automotive

Car accessories, seating components, structural parts, automotive parts, interior components for commercial vehicles, train, rail and others.

Marine

Aluminium equipment, handrail and ladder for cruise ships, yachts, leisure boats and other relevant products.

Solar

Module frames, components and other relevant products.

Conveyor & Automation

Aluminium conveyor system, T-slot profiles, material handling systems, engineering parts and components for machineries.

Bazaar

Flat bar, round bar, square bar, round tube, square hollow, rectangular hollow, equal angle, U-channel, hexagon bar and others.

Miscellaneous

Signage profiles, ladder, showcase, spandrel, carpet edge, plaster ceiling holder, whiteboard holder, signboard frame, insect screen and others.

Alloy Composition
Aluminium
Alloy (AA)
Silicon
(SI)

Iron (Fe)

Copper (Cu)

Manganese
(Mn)

Magnesium
(Mg)

Chromium
(Cr)

Zinc
(Zn)
Titanium
(Ti)
Other
(each)
Other
(total)
Aluminium
(Al)
*1070 0.20 0.25 0.04 0.03 0.03 - 0.04 0.03 0.03 - 99.7 Min
6005 0.60-0.90 0.35 0.10 0.10 0.40-0.60 0.10 0.10 0.10 0.05 0.15 Remainder
6061 0.40-0.80 0.70 max

0.15-0.40

0.15 0.80-1.20 0.04-0.35 0.25 0.15 0.05 0.15 Remainder
6063 0.20-0.60 0.35 0.10 0.10 0.45-0.90 0.10 0.10 0.10 0.05 0.15 Remainder
6082 0.70-1.30 0.50 max 0.10 0.40-1.00 0.60-1.20 0.25 max 0.20 0.10 0.05 0.15 Remainder

*Refer to American Society for Testing and Materials (ASTM).

Alloy Specification
Alloy Temper

Thickness
(mm)

Tensile Strength (Mpa) Elongatlon %
min in 50 mm
Ultimate Yield, 0.2% offset

Min

Max

Min

Max

1070 F All - - - - -
6005 T5 Up thru 3.20 260 - 240 - 8
3.20 - 25.00 260 - 240 - 10
6061 T4 All

180

- 110 - 16
T6, T6511 Up thru 12.50 260 - 240 - 8
6.30 and above 260 - 240 - 10
6063 T4 Up thru 12.50 130 - 70 - 14
12.50 - 25.00 125 - 60 - -
T5 Up thru 12.50 150 - 110 - 8
12.50 - 25.00 145 - 105 - -
T52 Up thru 25.00 150 205 110 170 8
T6 Up thru 3.20 205 - 170 - 8
3.20 - 25.00 205 - 170 - 10
6082 T6 Up thru 20.00 310 - 260 - 6
20.00 - 150.00 310 - 260 - -

Mechanical Properties (based on ASTM Standard)
* This is the general information only.

 

Temper Designation

F - As fabricated i.e. there is no special control over the temper of such material and it is normally in the as-extruded condition. No mechanical limits are specified.

T4 - Solution heat-treated and naturally aged to a substantially stable condition.

T5 - Air-cooled from the extrusion temperature and artificially aged to improve mechanical properties.

T52 - Cooled from an elevated temperature shapping process and the artificially aged to specified minimum and maximum strength levels.

T6 - Solution heat-treated nad the artifically aged. These products normally water quenched at the press.

T6511 - Applies to extruded rod, bar, profiles and tube and to drawn tube when stretched the indicated amount after solution heat treatment or after cooling from an elevated temperature shapping process. These products may receive minor straightening after stretching to comply with standard tolerances.